Instructions for using CRETER

Here is the unique advantage to using the CRETER, the simple 'FILL, MIX and CREATE!' method will ensure that you are ready to create, whatever you need, in just a few minutes. This page contains all you need to know regarding the mixing process, cleaning, maintenance and personal safety, when using your CRETER.

Pour measured dry mix, of cement and sand and aggregates into the CRETER and add water. See 'mix design' for ratio advice. note - The maximum weight recommended for a single mix is 80lb (36kg).

Start at one end of the CRETER. Lift the handles sharply. Alternate left and right hands, allowing the mixture to roll. Change ends or, flip with a friend. Continue until the contents are mixed thoroughly.

Place the CRETER over where you want to pour the mixture, lower one side and raise the other to pour.

To clean the CRETER simply rinse with water. Once dry, fold and pack away the CRETER for easy storage.

To ensure the CRETER remains free of wear, tear and holes, it is recommended that shovels are not used to empty the CRETER once contents have been mixed. Avoid prolonged exposure to the sun, while not in use.

Practice safe lifting methods (i.e. back straight and knees bent) when lifting the CRETER while mixing. To avoid exposure of the mixture to the skin we recommend that gloves are worn while using the CRETER. In the event that contact with the skin does occur, rinse thoroughly with clean water.